Desmodur® 44CP23
i
Market Switch
Selection will influence the results you get.
About
Product Types
No data available
Material
No data available
General Characterization
Isocyanate component for two-component polyurethane resin for vacuum assisted resin transfer molding (VARTM).
Desmodur 44CP23 in combination with Baydur® 120V2 is intended for the production of fiber-reinforced composites.
For more details on processing please refer to the technical datasheet of the polyol component Baydur 120V2.
The polyurethane resin has a very low viscosity and a long pot life at ambient temperature and a fast cure at elevated temperature.
Desmodur 44CP23 in combination with Baydur® 120V2 is intended for the production of fiber-reinforced composites.
For more details on processing please refer to the technical datasheet of the polyol component Baydur 120V2.
The polyurethane resin has a very low viscosity and a long pot life at ambient temperature and a fast cure at elevated temperature.
Storage Conditions
Drums should be protected against strong sunlight and always kept sealed to protect the contents from moisture or damp air.
Keep the container tightly closed in a well-ventilated place.
Recommended storage and transport temperature: 10 - 30 °C
Shelf life (ex works): 180 days if stored in sealed, moisture-tight containers
Keep the container tightly closed in a well-ventilated place.
Recommended storage and transport temperature: 10 - 30 °C
Shelf life (ex works): 180 days if stored in sealed, moisture-tight containers
Sampling
Moisture access should be prevented.
Packaging Type
No data available
Technical Properties & Datasheets
Characteristics
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| Density at 25 °C | calculated | g/ml | approx. 1.23 |
Specifications
| Property Name | Test Method | Unit | Value |
|---|---|---|---|
| NCO-content | DIN EN ISO 11909 | % | 29,5 to 31,8 |
| NCO-content | DIN EN ISO 11909 | % | 29,5 to 31,8 |
| Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | 150 to 230 |
| Viscosity at 25 °C | DIN EN ISO 3219/A.3 | mPa*s | 150 to 230 |
Downloads
-
Technical Data Sheet
-
Safety Data SheetNo direct download available, please visit www.productsafetyfirst.covestro.com
